MAX20092ATJ/VY+T

Analog Devices / Maxim Integrated
700-MAX20092ATJ/VY+T
MAX20092ATJ/VY+T

制造商:

说明:
LED照明驱动器IC 12 Channel Matrix Manager

ECAD模型:
下载免费库加载程序,将此文件转换,以供您的ECAD工具使用。了解详情。
Mouser 目前在您所在地区不销售该产品。

供货情况

库存:

备用包装

制造商零件编号:
包装:
供货情况:
单价:
最小:
0

产品属性 属性值 选择属性
Analog Devices Inc.
产品种类: LED照明驱动器IC
交货限制:
 Mouser 目前在您所在地区不销售该产品。
RoHS:  
12 Output
Boost, Buck
1.5 A
TQFN-32
5.5 V
4.5 V
2 kHz
Adjustable
MAX20092
- 40 C
+ 125 C
PWM Dimming, Open LED Protection
AEC-Q100
Reel
Cut Tape
MouseReel
商标: Analog Devices / Maxim Integrated
组装国: Not Available
扩散国家: Not Available
原产国: TW, CN
输入电压: 4.5 V to 5.5 V
安装风格: SMD/SMT
通道数量: 12 Channel
产品: LED Drivers
产品类型: LED Lighting Drivers
工厂包装数量: 2500
子类别: Driver ICs
电源电流—最大值: 1.3 mA
类型: Matrix Manager
单位重量: 1.828 g
找到的产品:
要显示类似产品,至少选中一个复选框
要显示该类别下的类似产品,请至少选中上方的一个复选框。
已选择的属性: 0

CAHTS:
8542390000
USHTS:
8542390090
TARIC:
8542399000
MXHTS:
8542399999
ECCN:
EAR99

IS32LT3175N/P Single-Channel Linear LED Drivers

ISSI IS32LT3175N/P Single-Channel Linear LED Drivers come with fade in/out and PWM dimming. The regulators serve as a stand-alone LED driver-configurable from 20mA to 150mA with external resistors, no microcontroller is necessary. A logic level “courtesy light” signal from the PWM pin can be interfaced to precisely drive the LED channel. The IS32LT3175P obtains a positive polarity PWM signal. In addition, the IS32LT3175N obtains a negative polarity PWM signal. The regulator integrates a 63-step fade-in and fades out the algorithm (Gamma correction). This causes the output LED current to increasingly rise up to the full source value after the EN pin is pulsed.

MAX20092 12开关矩阵管理器IC

Analog Devices Inc. MAX20092 12开关矩阵管理器IC(用于汽车照明应用)包括一个12开关阵列,用于旁路连接单串或双串应用中的单个LED。该器件具有12个单独控制的N沟道MOSFET开关,额定电压为10V,导通电阻为0.100Ω 。单个电流源可用于为串联的所有LED供电。通过打开和关闭每个LED上的旁路开关可以为单个LED调光。该IC还可配置为两串(每串串联六个开关)或四串(每串三个开关)。一个单独的电流源为每个灯串均供电。每个开关均可跨接一个或两个LED。该IC还包括一个内部电荷泵,为每个LED旁路开关的栅极驱动供电。该开关的低导通电阻可最大限度地降低导通损耗和功耗。

Optical ADI SLP