AD5640CRMZ-2

高速转换器

Analog Devices, Inc. (ADI) 的高速模数转换器、数模转换器和AFE/CODEC构成了业界知名的高速数据转换器产品组合。ADI的高速数据转换器具有出色性能、高输入带宽和集成的信号处理，使设计人员能够轻松、可靠地选择合适的方案用于各种应用，包括仪表、军用/航天、无线/有线通信和医学影像。

AD5620/AD5640/AD5660 nanoDACs

Analog Devices AD5620/AD5640/AD5660 nanoDACs are offered as low power, single, 12-/14-/16-bit, buffered voltage-out DACs. Guaranteed monotonic by design, the devices integrate a power-on reset circuit that ensures the nanoDACs output powers up to 0V (AD5620/AD5640/AD5660-1-2) or midscale (AD5620-3 and AD5660-3) and remains at the voltage until a valid write takes place. A power-down feature reduces the current consumption of the nanoDACs to 480nA at 5V and delivers software-selectable output loads while in power-down mode. These devices have a power consumption rate of 2.5mW at 5V and 1μW in power-down mode. The on-chip precision output amplifier enables rail-to-rail output swing to be achieved. The AD5620/AD5640/AD5660 have a versatile 3-wire serial interface that operates at clock rates up to 30MHz and is compatible with standard SPI®, QSPI™, MICROWIRE™, and DSP interface standards. The AD5620/AD5640/AD5660-1 devices feature an internal, 1.25V, 5ppm/°C reference, enabling a full-scale output voltage range of 2.5V. The AD5620/AD5640/AD5660-2-3 devices have an internal, 2.5V, 5ppm/°C reference, allowing a full-scale output voltage range of 5V.

数据转换器

Analog Devices Inc.数据转换器是一系列具有超高性价比的数据转换器。这些转换器可为各种应用提供准确可靠的转换。典型应用包括工业自动化、可编程逻辑控制器、光学收发器、数据采集等。

数模转换器 (DAC)

Analog Devices Inc.提供从8位到24位、从单通道到多达40通道的种类极其丰富的数模转换器 (DAC)。ADI DAC采用高密度封装，具有灵活的I/O、高直流精度和低毛刺。Analog Device DAC在各种开环或闭环系统中运行良好，具有可调增益、失调和诸多其他信号以及快速建立特性的DAC适用于波形生成等交流应用。Analog Devices的产品组合包括易于使用的集成输出放大器选项、用于在非常宽的带宽上生成多载波的动态范围DAC，以及各种其他数模转换器，可以满足任何设计需求。

Digital to Analog Converters ADI SLP