MCP6V27-E/SN

Microchip Technology
579-MCP6V27-E/SN
MCP6V27-E/SN

制造商:

说明:
运算放大器 - 运放 620 uA, 2 MHz Auto-Zeroed Op Amps

ECAD模型:
下载免费库加载程序,将此文件转换,以供您的ECAD工具使用。了解详情。

库存量: 920

库存:
920 可立即发货
生产周期:
6 周 大于所示数量的预计工厂生产时间。
最少: 1   倍数: 1
单价:
¥-.--
总价:
¥-.--
预估关税:

定价 (含13% 增值税)

数量 单价
总价
¥27.7867 ¥27.79
¥23.1085 ¥577.71
¥20.9276 ¥2,092.76

产品属性 属性值 选择属性
Microchip
产品种类: 运算放大器 - 运放
RoHS:  
2 Channel
2 MHz
1 V/us
2 uV
5 nA
5.5 V
2.3 V
620 uA
22 mA
120 dB
50 nV/sqrt Hz
SOIC-8
SMD/SMT
No Shutdown
- 40 C
+ 125 C
MCP6V27
AEC-Q100
Tube
商标: Microchip Technology
组装国: Not Available
扩散国家: US
原产国: TH
湿度敏感性: Yes
产品: Operational Amplifiers
产品类型: Op Amps - Operational Amplifiers
PSRR - 电源抑制比: 142 dB
工厂包装数量: 100
子类别: Amplifier ICs
Vcm - 共模电压: 2.3 V to 5.5 V
单位重量: 540 mg
找到的产品:
要显示类似产品,至少选中一个复选框
要显示该类别下的类似产品,请至少选中上方的一个复选框。
已选择的属性: 0

此功能要求启用JavaScript。

CNHTS:
8542339000
CAHTS:
8542330000
USHTS:
8542330001
JPHTS:
8542330996
KRHTS:
8532331000
MXHTS:
8542330299
ECCN:
EAR99

汽车模拟产品

汽车电子控制模块的设计人员面临着在各种系统中提供更高性能的挑战,包括动力传动系统、底盘、舒适性、驾驶员信息、娱乐和安全。Microchip Technology广泛的低功耗模拟产品组合支持开发高性价比解决方案,这些解决方案可应对这些挑战以及系统设计人员面临的其他挑战。作为首批将非易失性存储器 (非易失性存储器) 技术用于模拟产品开发过程的公司之一,Microchip凭借其在NVM方面的经验提供具有出色电气特性的创新模拟解决方案。 

MCP6V2x Auto-Zeroed Op Amps

Microchip's MCP6V2x Auto-Zeroed Op Amps provide input offset voltage correction for very low offset and offset drift. These devices have a wide gain bandwidth product (2 MHz, typical) and strongly reject switching noise. They are unity gain stable, have no 1/f noise, and have good power supply rejection ratio (PSRR) and common mode rejection ratio (CMRR). These products operate with a single supply voltage as low as 2.3V, while drawing 620 μA/amplifier (typical) of quiescent current. These op amps are offered as a single (MCP6V26), single with Chip Select (CS) (MCP6V28) and dual (MCP6V27).
Learn More

MCP6xx Op Amps

The Microchip Technology MCP62x and MCP65x are the first op amps to include mCal, an on-chip calibration circuit that calibrates offset voltage at power-up using an internal power on-reset detector or based upon the state of an external pin. The result is that the MCP62x and MCP65x have a low initial voltage offset and a means to minimize drift over time and temperature for applications involving instrumentation and sensor conditioning. These high-bandwidth, low-power Microchip Technology MCP62x / MCP65x op amps provide low bias and quiescent currents, high output drive capability, and a rail-to-rail output for better performance across the entire operating-voltage range. These Microchip Technology op amps feature a high output-drive current that enables them to drive heavy loads in a wide variety of applications.