MP3209DJ-LF-Z

Monolithic Power Systems (MPS)
946-MP3209DJLFZ
MP3209DJ-LF-Z

制造商:

说明:
LED照明驱动器IC 1.3MHz, 350mA Boost Converter

ECAD模型:
下载免费库加载程序,将此文件转换,以供您的ECAD工具使用。了解详情。

库存量: 2,690

库存:
2,690 可立即发货
生产周期:
14 周 大于所示数量的预计工厂生产时间。
最少: 1   倍数: 1
单价:
¥-.--
总价:
¥-.--
预估关税:
封装:
整卷卷轴(请按3000的倍数订购)

定价 (含13% 增值税)

数量 单价
总价
剪切带/MouseReel™
¥12.1588 ¥12.16
¥8.9383 ¥89.38
¥8.0569 ¥201.42
¥7.1529 ¥715.29
¥6.7235 ¥1,680.88
¥6.4636 ¥3,231.80
¥6.2489 ¥6,248.90
整卷卷轴(请按3000的倍数订购)
¥5.9777 ¥17,933.10
¥5.8534 ¥35,120.40
† ¥15.00 MouseReel™费将被加上并在购物车计算。所有MouseReel™订单均不可撤消和退回。

备用包装

制造商零件编号:
包装:
Reel, Cut Tape, MouseReel
供货情况:
库存量
单价:
¥15.2211
最小:
1

类似产品

Monolithic Power Systems (MPS) MP3209DJ-LF-P
Monolithic Power Systems (MPS)
开关稳压器 1.3MHz, 350mA Boost Converter

产品属性 属性值 选择属性
Monolithic Power Systems (MPS)
产品种类: LED照明驱动器IC
RoHS:  
1 Output
Boost
350 mA
TSOT-23-5
6 V
2.5 V
1.4 MHz
3 V to 22 V
MP3209
- 40 C
+ 85 C
Soft Start
Reel
Cut Tape
MouseReel
商标: Monolithic Power Systems (MPS)
组装国: Not Available
扩散国家: Not Available
原产国: CN
输入电压: 2.5 V to 6 V
安装风格: SMD/SMT
通道数量: 1 Channel
Pd-功率耗散: 570 mW
产品: Voltage Regulators
产品类型: LED Lighting Drivers
工厂包装数量: 3000
子类别: Driver ICs
电源电流—最大值: 850 uA
类型: Step-Up Converter
单位重量: 6.300 mg
找到的产品:
要显示类似产品,至少选中一个复选框
要显示该类别下的类似产品,请至少选中上方的一个复选框。
已选择的属性: 0

CNHTS:
8542399000
CAHTS:
8542390000
USHTS:
8542390090
JPHTS:
854239099
TARIC:
8542399000
MXHTS:
8542399901
ECCN:
EAR99

IS32LT3175N/P Single-Channel Linear LED Drivers

ISSI IS32LT3175N/P Single-Channel Linear LED Drivers come with fade in/out and PWM dimming. The regulators serve as a stand-alone LED driver-configurable from 20mA to 150mA with external resistors, no microcontroller is necessary. A logic level “courtesy light” signal from the PWM pin can be interfaced to precisely drive the LED channel. The IS32LT3175P obtains a positive polarity PWM signal. In addition, the IS32LT3175N obtains a negative polarity PWM signal. The regulator integrates a 63-step fade-in and fades out the algorithm (Gamma correction). This causes the output LED current to increasingly rise up to the full source value after the EN pin is pulsed.