HVLED001ATR

STMicroelectronics
511-HVLED001ATR
HVLED001ATR

制造商:

说明:
LED照明驱动器IC Offline controller for LED lighting with constant voltage primary-sensing and hi

ECAD模型:
下载免费库加载程序,将此文件转换,以供您的ECAD工具使用。了解详情。

库存量: 1,310

库存:
1,310 可立即发货
生产周期:
20 周 大于所示数量的预计工厂生产时间。
最少: 1   倍数: 1
单价:
¥-.--
总价:
¥-.--
预估关税:
封装:
整卷卷轴(请按2500的倍数订购)

定价 (含13% 增值税)

数量 单价
总价
剪切带/MouseReel™
¥27.0522 ¥27.05
¥19.0292 ¥190.29
¥17.1195 ¥427.99
¥14.8934 ¥1,489.34
¥13.899 ¥3,474.75
¥13.1532 ¥6,576.60
¥12.4865 ¥12,486.50
整卷卷轴(请按2500的倍数订购)
¥8.9383 ¥22,345.75
† ¥15.00 MouseReel™费将被加上并在购物车计算。所有MouseReel™订单均不可撤消和退回。

备用包装

制造商零件编号:
包装:
Tube
供货情况:
库存量
单价:
¥13.1532
最小:
1

产品属性 属性值 选择属性
STMicroelectronics
产品种类: LED照明驱动器IC
RoHS:  
1 Output
Boost, Buck, Flyback, SEPIC
600 mA
SSO-10
16.5 V
16.5 V
Adjustable
HVLED001A
- 40 C
+ 125 C
PWM Dimming, Constant Voltage
Reel
Cut Tape
MouseReel
商标: STMicroelectronics
组装国: Not Available
扩散国家: Not Available
原产国: CN
用于: High Power LEDs
输入电压: 16.5 V
湿度敏感性: Yes
安装风格: SMD/SMT
通道数量: 1 Channel
输出类型: Constant Current
产品: LED Drivers
产品类型: LED Lighting Drivers
工厂包装数量: 2500
子类别: Driver ICs
电源电流—最大值: 3.15 mA
类型: Off-Line LED Driver
单位重量: 81 mg
找到的产品:
要显示类似产品,至少选中一个复选框
要显示该类别下的类似产品,请至少选中上方的一个复选框。
已选择的属性: 0

CNHTS:
8542399000
CAHTS:
8542390000
USHTS:
8542390090
JPHTS:
854239099
TARIC:
8542399000
MXHTS:
8542399901
ECCN:
EAR99

HVLED001A LED照明离线控制器

STMicroelectronics HVLED001A LED照明离线控制器采用准谐振 (QR) 拓扑,在任何负载下都具有经过优化的输出电压精度(PSR模式)。该增强型峰值电流模式控制器能够控制LED驱动器中高功率因数 (HPF) 反激式或降压-升压拓扑,输出功率高达150W。还实施了降压、升压和SEPIC等其他拓扑。

IS32LT3175N/P Single-Channel Linear LED Drivers

ISSI IS32LT3175N/P Single-Channel Linear LED Drivers come with fade in/out and PWM dimming. The regulators serve as a stand-alone LED driver-configurable from 20mA to 150mA with external resistors, no microcontroller is necessary. A logic level “courtesy light” signal from the PWM pin can be interfaced to precisely drive the LED channel. The IS32LT3175P obtains a positive polarity PWM signal. In addition, the IS32LT3175N obtains a negative polarity PWM signal. The regulator integrates a 63-step fade-in and fades out the algorithm (Gamma correction). This causes the output LED current to increasingly rise up to the full source value after the EN pin is pulsed.