LM3401MMX/NOPB

Texas Instruments
926-LM3401MMX/NOPB
LM3401MMX/NOPB

制造商:

说明:
LED照明驱动器IC Hysteretic PFET cont roller for high pow A 926-LM3401MM/NOPB

ECAD模型:
下载免费库加载程序,将此文件转换,以供您的ECAD工具使用。了解详情。

库存量: 1,171

库存:
1,171 可立即发货
生产周期:
12 周 大于所示数量的预计工厂生产时间。
最少: 1   倍数: 1
单价:
¥-.--
总价:
¥-.--
预估关税:
封装:
整卷卷轴(请按3500的倍数订购)

定价 (含13% 增值税)

数量 单价
总价
剪切带/MouseReel™
¥10.9158 ¥10.92
¥7.9326 ¥79.33
¥7.1981 ¥179.95
¥6.3732 ¥637.32
¥5.9777 ¥1,494.43
¥5.7404 ¥2,870.20
¥5.5483 ¥5,548.30
整卷卷轴(请按3500的倍数订购)
¥5.2771 ¥18,469.85
¥5.1641 ¥36,148.70
† ¥15.00 MouseReel™费将被加上并在购物车计算。所有MouseReel™订单均不可撤消和退回。

备用包装

制造商零件编号:
包装:
Reel, Cut Tape, MouseReel
供货情况:
库存量
单价:
¥12.8255
最小:
1

类似产品

Texas Instruments LM3401MM/NOPB
Texas Instruments
LED照明驱动器IC HYSTERETIC PFET CONT ROLLER A 926-LM3401 A 926-LM3401MMX/NOPB

产品属性 属性值 选择属性
Texas Instruments
产品种类: LED照明驱动器IC
RoHS:  
1 Output
Buck
1 A
VSSOP-8
35 V
4.5 V
1.5 MHz
Adjustable
LM3401
- 40 C
+ 125 C
Adjustable Switch Frequency, Enable/Shutdown
Reel
Cut Tape
MouseReel
商标: Texas Instruments
组装国: Not Available
扩散国家: Not Available
原产国: CN
调光: PWM
高电平输出电流: 20 uA
输入电压: 4.5 V to 35 V
低电平输出电流: 5.5 uA
安装风格: SMD/SMT
通道数量: 1 Channel
输出类型: Constant Current
Pd-功率耗散: 660 mW
产品类型: LED Lighting Drivers
工厂包装数量: 3500
子类别: Driver ICs
电源电流—最大值: 1.05 mA
类型: Inductive
单位重量: 58 mg
找到的产品:
要显示类似产品,至少选中一个复选框
要显示该类别下的类似产品,请至少选中上方的一个复选框。
已选择的属性: 0

此功能要求启用JavaScript。

CNHTS:
8542399000
CAHTS:
8542310000
USHTS:
8542310030
JPHTS:
854239099
TARIC:
8542399000
MXHTS:
8542399901
ECCN:
EAR99

IS32LT3175N/P Single-Channel Linear LED Drivers

ISSI IS32LT3175N/P Single-Channel Linear LED Drivers come with fade in/out and PWM dimming. The regulators serve as a stand-alone LED driver-configurable from 20mA to 150mA with external resistors, no microcontroller is necessary. A logic level “courtesy light” signal from the PWM pin can be interfaced to precisely drive the LED channel. The IS32LT3175P obtains a positive polarity PWM signal. In addition, the IS32LT3175N obtains a negative polarity PWM signal. The regulator integrates a 63-step fade-in and fades out the algorithm (Gamma correction). This causes the output LED current to increasingly rise up to the full source value after the EN pin is pulsed.