LP8865ZQDMTRQ1

Texas Instruments
595-LP8865ZQDMTRQ1
LP8865ZQDMTRQ1

制造商:

说明:
LED照明驱动器IC Automotive 65-V 2-A buck LED driver wit

ECAD模型:
下载免费库加载程序,将此文件转换,以供您的ECAD工具使用。了解详情。

库存量: 2,050

库存:
2,050 可立即发货
生产周期:
12 周 大于所示数量的预计工厂生产时间。
最少: 1   倍数: 1
单价:
¥-.--
总价:
¥-.--
预估关税:

定价 (含13% 增值税)

数量 单价
总价
¥24.5888 ¥24.59
¥15.9782 ¥159.78
¥14.5092 ¥362.73
¥12.2492 ¥1,224.92
¥11.4695 ¥2,867.38
¥10.0796 ¥5,039.80
¥8.5428 ¥8,542.80
¥7.8309 ¥23,492.70
¥7.6614 ¥45,968.40

产品属性 属性值 选择属性
Texas Instruments
产品种类: LED照明驱动器IC
RoHS:  
1 Output
Buck
2 A
VSON-14
65 V
4.5 V
100 kHz to 2.2 MHz
LP8865Z
- 40 C
+ 125 C
Cycle-by-Cycle Over-Current Protection, Fault Output, Integrated Switching FET, LED Open Detection, LED Short Detection, Programable Switching Frequency, Spread Spectrum, Thermal Foldback, Thermal Shutdown
商标: Texas Instruments
组装国: CN
扩散国家: US
原产国: CN
调光: Analog, Flexible, Hrbrid, PWM
安装风格: SMD/SMT
通道数量: 1 Channel
产品: Automotive LED Drivers
产品类型: LED Lighting Drivers
工厂包装数量: 3000
子类别: Driver ICs
类型: Non-Synchronous Multi-Topology LED Driver
找到的产品:
要显示类似产品,至少选中一个复选框
要显示该类别下的类似产品,请至少选中上方的一个复选框。
已选择的属性: 0

此功能要求启用JavaScript。

CNHTS:
8542399000
CAHTS:
8542390000
USHTS:
8542390090
TARIC:
8542399000
MXHTS:
8542399999
ECCN:
EAR99

LP8865-Q1多拓扑LED驱动器

Texas Instruments LP8865-Q1多拓扑LED驱动器提供具有电感快速​​调光功能的非同步多拓扑解决方案,可在4.5V至65V的宽输入电压范围内运行。这些LED驱动器的开关频率可在100kHz至2.2MHz范围内进行配置,并具有可选的扩频功能,可实现更好的EMI性能。LP8865-Q1系列驱动器提供多种系统保护,包括LED开路和短路、检测电阻器开路和短路、可配置热折返和关断。这些驱动器支持模拟调光、PWM调光、混合调光和灵活调光选项。每种调光方法都可使用简单的高电平和低电平信号,通过PWM和ADIM输入引脚进行配置。LP8865-Q1驱动器非常适合用于汽车信息娱乐系统、汽车组合仪表、抬头显示器(HUD)和汽车照明。这些LP8865-Q1器件符合汽车应用类AEC-Q100标准。

IS32LT3175N/P Single-Channel Linear LED Drivers

ISSI IS32LT3175N/P Single-Channel Linear LED Drivers come with fade in/out and PWM dimming. The regulators serve as a stand-alone LED driver-configurable from 20mA to 150mA with external resistors, no microcontroller is necessary. A logic level “courtesy light” signal from the PWM pin can be interfaced to precisely drive the LED channel. The IS32LT3175P obtains a positive polarity PWM signal. In addition, the IS32LT3175N obtains a negative polarity PWM signal. The regulator integrates a 63-step fade-in and fades out the algorithm (Gamma correction). This causes the output LED current to increasingly rise up to the full source value after the EN pin is pulsed.