TPS923650D1DGNR

Texas Instruments
595-TPS923650D1DGNR
TPS923650D1DGNR

制造商:

说明:
LED照明驱动器IC 65V 1A boost or buc k-boost LED driver w

寿命周期:
新产品:
此制造商的新产品。
ECAD模型:
下载免费库加载程序,将此文件转换,以供您的ECAD工具使用。了解详情。

库存量: 1,960

库存:
1,960
可立即发货
在途量:
2,500
生产周期:
18
大于所示数量的预计工厂生产时间。
最少: 1   倍数: 1
单价:
¥-.--
总价:
¥-.--
预估关税:
封装:
整卷卷轴(请按2500的倍数订购)

定价 (含13% 增值税)

数量 单价
总价
剪切带/MouseReel™
¥6.5201 ¥6.52
¥4.6782 ¥46.78
¥4.2036 ¥105.09
¥3.6838 ¥368.38
¥3.4352 ¥858.80
¥3.2883 ¥1,644.15
整卷卷轴(请按2500的倍数订购)
¥3.0284 ¥7,571.00
¥2.9493 ¥14,746.50
† ¥15.00 MouseReel™费将被加上并在购物车计算。所有MouseReel™订单均不可撤消和退回。

产品属性 属性值 选择属性
Texas Instruments
产品种类: LED照明驱动器IC
RoHS:  
1 Output
Buck
HVSSOP-8
65 V
4.5 V
1 MHz
0 V to 5 V
TPS923650
- 40 C
+ 125 C
Reel
Cut Tape
MouseReel
商标: Texas Instruments
组装国: MY
扩散国家: US
原产国: MY
调光: PWM
输入电压: 4.5 V to 65 V
安装风格: SMD/SMT
通道数量: 1 Channel
产品: LED Driver
产品类型: LED Lighting Drivers
工厂包装数量: 2500
子类别: Driver ICs
类型: Non Synchronous LED Driver
找到的产品:
要显示类似产品,至少选中一个复选框
要显示该类别下的类似产品,请至少选中上方的一个复选框。
已选择的属性: 0

此功能要求启用JavaScript。

USHTS:
8542390090
TARIC:
8542399000
MXHTS:
8542399999
ECCN:
EAR99

TPS92365x升压/降压-升压LED驱动器

Texas Instruments TPS92365x非同步升压/降压-升压LED驱动器具有4.5V至65V的宽输入范围。通过集成低侧NMOS开关,该器件能以高功率密度和高效率驱动LED并为电池充电。这些器件的典型电流限制为1.5A (TPS922650)、3A(TPS922651、TPS922652和TPS922653)和6.5A(TPS922654和TPS922655)。TPS92365x还支持共阳极连接和单层PCB设计。开关频率可在100kHz至2.2MHz范围内配置,具有可选的扩频功能,可实现更好的EMI性能。

IS32LT3175N/P Single-Channel Linear LED Drivers

ISSI IS32LT3175N/P Single-Channel Linear LED Drivers come with fade in/out and PWM dimming. The regulators serve as a stand-alone LED driver-configurable from 20mA to 150mA with external resistors, no microcontroller is necessary. A logic level “courtesy light” signal from the PWM pin can be interfaced to precisely drive the LED channel. The IS32LT3175P obtains a positive polarity PWM signal. In addition, the IS32LT3175N obtains a negative polarity PWM signal. The regulator integrates a 63-step fade-in and fades out the algorithm (Gamma correction). This causes the output LED current to increasingly rise up to the full source value after the EN pin is pulsed.