KSC441 V2 70SH SP DELTA LFS

C&K
611-KSC441V2SPDELTAL
KSC441 V2 70SH SP DELTA LFS

制造商:

说明:
触觉开关

ECAD模型:
下载免费库加载程序,将此文件转换,以供您的ECAD工具使用。了解详情。

库存量: 6,067

库存:
6,067 可立即发货
生产周期:
15 周 大于所示数量的预计工厂生产时间。
最少: 1   倍数: 1
单价:
¥-.--
总价:
¥-.--
预估关税:

定价 (含13% 增值税)

数量 单价
总价
¥7.9439 ¥7.94
¥6.8365 ¥68.37
¥6.3619 ¥159.05
¥5.6726 ¥567.26
¥5.2658 ¥1,316.45
¥5.1076 ¥2,553.80
整卷卷轴(请按800的倍数订购)
¥4.3505 ¥3,480.40
¥4.1245 ¥9,898.80
¥4.0228 ¥19,309.44

产品属性 属性值 选择属性
C&K Switches
产品种类: 触觉开关
RoHS:  
Non-Illuminated
SMD/SMT
Right Angle
1.175 mm
Round
OFF - (ON)
2 N
50 mA
32 VDC
1 VA
No
SPST
Solder Pin
Orange
6.2 mm
6.2 mm
5.2 mm
KSC
300000 Cycle
IP67
Reel
Cut Tape
商标: C&K
触点电镀: Silver
组装国: Not Available
扩散国家: Not Available
原产国: FR
最大工作温度: + 85 C
最小工作温度: - 40 C
产品类型: Tactile Switches
工厂包装数量: 800
子类别: Switches
零件号别名: KSC441V270SHSPDELTALFS Y31A31448FP LFS
单位重量: 1.304 g
找到的产品:
要显示类似产品,至少选中一个复选框
要显示该类别下的类似产品,请至少选中上方的一个复选框。
已选择的属性: 0

CNHTS:
8536500090
CAHTS:
8536509090
USHTS:
8536509031
JPHTS:
853650090
KRHTS:
8536502000
BRHTS:
85365090
ECCN:
EAR99

电动自行车 (e-Bikes) 解决方案

Littelfuse提供适合用于电动自行车应用的各种产品组合,包括开关、保险丝和二极管。各种应用中的许多电池供电设备都有类似的安全和控制元件,例如清洁设备、建筑工具、园艺工具和电动工具。Littelfuse电动自行车解决方案可用于电机驱动、舒适装置和显示器。

C&K KSCV2 Series Sealed Tact Switch

C&K Switches KSCV2 Series Sealed Tact Switch is a side-actuated momentary normally open SPST switch with haptic feedback. The series features silver or gold contacts, pin in paste termination, and operating force of 3.5N. This switch is suitable for automotive applications, as well as industrial electronics, network equipment, and telecommunications.
Learn more.

KSC Sealed Tact Switches for SMT

C&K Switches KSC Series Sealed Tact Switches for SMT are ultra-long life switches designed to withstand intensive use and last up to 5 million cycles. The silicon actuators facilitate switch integration and provide possible pre-travel and post-travel depending on force and actuator hardness. The switches best match applications such as elevator and joystick buttons that require resistant switches. The KSC Series exist in both J bend and Gullwing versions to better fit the chosen soldering process.