NSIC2020JBT3G

onsemi
863-NSIC2020JBT3G
NSIC2020JBT3G

制造商:

说明:
LED照明驱动器IC CCR&LED Drivr A/C of line120V,20mA +/-15%

ECAD模型:
下载免费库加载程序,将此文件转换,以供您的ECAD工具使用。了解详情。

库存量: 2,990

库存:
2,990
可立即发货
在途量:
7,500
生产周期:
15
大于所示数量的预计工厂生产时间。
最少: 1   倍数: 1   最多: 5000
单价:
¥-.--
总价:
¥-.--
预估关税:
封装:
整卷卷轴(请按2500的倍数订购)

定价 (含13% 增值税)

数量 单价
总价
剪切带/MouseReel™
¥4.2149 ¥4.21
¥3.0058 ¥30.06
¥2.7007 ¥67.52
¥2.373 ¥237.30
¥2.2148 ¥553.70
¥2.1131 ¥1,056.55
¥2.034 ¥2,034.00
整卷卷轴(请按2500的倍数订购)
¥1.9549 ¥4,887.25
¥1.8984 ¥9,492.00
† ¥15.00 MouseReel™费将被加上并在购物车计算。所有MouseReel™订单均不可撤消和退回。

产品属性 属性值 选择属性
onsemi
产品种类: LED照明驱动器IC
RoHS:  
REACH - SVHC:
1 Output
Boost, Buck
20 mA
SMB-2
120 V
120 V
100 Hz to 100 kHz
Adjustable
NSIC2020JB
- 55 C
+ 175 C
Constant Current
Reel
Cut Tape
MouseReel
商标: onsemi
组装国: VN
扩散国家: CZ
原产国: VN
输入电压: 120 V
安装风格: SMD/SMT
通道数量: 1 Channel
Pd-功率耗散: 3 W
产品: Constant Current LED Drivers
产品类型: LED Lighting Drivers
工厂包装数量: 2500
子类别: Driver ICs
电源电流—最大值: 23 mA
单位重量: 93 mg
找到的产品:
要显示类似产品,至少选中一个复选框
要显示该类别下的类似产品,请至少选中上方的一个复选框。
已选择的属性: 0

CNHTS:
8542399000
CAHTS:
8542310000
USHTS:
8542310060
JPHTS:
8541290100
KRHTS:
8541299000
TARIC:
8541290000
MXHTS:
85412999
ECCN:
EAR99

汽车IVN和照明解决方案

安森美半导体提供的节能型汽车解决方案可减少排放、改善燃油经济性,并增强照明、安全、连接和信息娱乐供电系统。

NSIC20x0 LED Drivers

onsemis NSIC20x0 LED Drivers use a linear Constant Current Regulator (CCR), a simple, economical and robust device designed to provide a cost-effective solution for regulating current in LEDs (similar to Constant Current Diode, CCD). The CCR is based on Self-Biased Transistor (SBT) technology and regulates current over a wide voltage range. It is designed with a negative temperature coefficient to protect LEDs from thermal runaway at extreme voltages and currents. The CCR turns on immediately and requires no external components allowing it to be designed as a high or low-side regulator. The 120V anode-cathode voltage rating is designed to withstand the high peak voltage incurred in A/C offline applications. The high anode-cathode voltage rating of the onsemis NSIC20x0 LED Drivers withstands surges common in automotive, industrial and commercial signage applications.

IS32LT3175N/P Single-Channel Linear LED Drivers

ISSI IS32LT3175N/P Single-Channel Linear LED Drivers come with fade in/out and PWM dimming. The regulators serve as a stand-alone LED driver-configurable from 20mA to 150mA with external resistors, no microcontroller is necessary. A logic level “courtesy light” signal from the PWM pin can be interfaced to precisely drive the LED channel. The IS32LT3175P obtains a positive polarity PWM signal. In addition, the IS32LT3175N obtains a negative polarity PWM signal. The regulator integrates a 63-step fade-in and fades out the algorithm (Gamma correction). This causes the output LED current to increasingly rise up to the full source value after the EN pin is pulsed.