-ar 信号调节

结果: 136
选择 图像 零件编号 制造商 描述 数据表 供货情况 单价(含13%增值税) 根据您的数量,按照单价筛选表格中的结果。 数量 RoHS ECAD模型 产品类型 产品 频率 频率范围 电压额定值 带宽 阻抗 端接类型 封装 / 箱体 最小工作温度 最大工作温度 系列 封装
Marki Microwave 信号调节 The PBR-0003SMG is a 10 MHz to 3 GHz surface mount high isolation power combiner. This power combiner features a unique hand tuned construction that enables 40 dB typical isolation across the operational bandwidth.

Signal Conditioning
Marki Microwave 信号调节 MQS-0418 is a MMIC 4GHz - 18GHz 90 splitter/combiner. Wire bondable 50 ohm terminations are available on-chip. Passive GaAs MMIC technology allows production of smaller constructions that replace larger form factor circuit board constructions.

Signal Conditioning
Marki Microwave 信号调节 The MM1-1850H is a passive double balanced MMIC mixer. It features excellent conversion loss, superior isolations and spurious performance across a broad bandwidth, in a highly miniaturized form factor.

Signal Conditioning
Marki Microwave 信号调节 The MM1-1857H is a passive double balanced MMIC mixer. It features excellent conversion loss, superior isolations and spurious performance across a broad bandwidth, in a highly miniaturized form factor.

Signal Conditioning
Marki Microwave 信号调节 The MM1-1240S is a passive double balanced MMIC mixer. It features excellent conversion loss, superior isolations and spurious performance across a broad bandwidth, in a highly miniaturized form factor.

Signal Conditioning
Marki Microwave 信号调节 The C10-0667 is a broadband 6-67 GHz, 10 dB directional coupler. The multisection tri-plate stripline design exhibits excellent coupling flatness and VSWR at all ports.

Signal Conditioning
Marki Microwave 信号调节 The C09-0R426 is a broadband 0.45-26.5 GHz, 9 dB directional coupler. The multisection tri-plate stripline design exhibits excellent coupling flatness and VSWR at all ports.

Signal Conditioning
Marki Microwave 信号调节 The MM1-1140H is a passive double balanced MMIC mixer. It features excellent conversion loss, superior isolations and spurious performance across a broad bandwidth, in a highly miniaturized form factor.

Signal Conditioning
Marki Microwave 信号调节 The MFBC-00019M family of passive MMIC bandpass filters are an ideal solution for mmWave, high rejection filtering. Marki employs unique packaging techniques to provide optimal performance in a convenient connectorized module.

Signal Conditioning
Endress+Hauser 信号调节 Active barrier Non-hazardous area Push-in terminals Signal doubler

Signal Conditioning Doublers 24 VDC Push-In - 40 C + 60 C RN22
Marki Microwave 信号调节 The MMD-1648L is a balanced MMIC doubler covering 16 to 48 GHz on the output. It features superior isolations and harmonic suppressions across a broad bandwidth in a highly miniaturized form factor.

Signal Conditioning
Marki Microwave 信号调节 The MQS-0218 is a MMIC 2GHz - 18GHz 90 splitter/combiner. Wire bondable 50 ohm terminations are available on-chip. Passive GaAs MMIC technology allows production of smaller constructions that replace larger form factor circuit board constructions.

Signal Conditioning
Marki Microwave 信号调节 The MFBC-00018M family of passive MMIC bandpass filters are an ideal solution for mmWave, high rejection filtering. Marki employs unique packaging techniques to provide optimal performance in a convenient connectorized module.

Signal Conditioning
Marki Microwave 信号调节 The MFBC-00017M family of passive MMIC bandpass filters are an ideal solution for mmWave, high rejection filtering. The MFBC-00017M is available as a connectorized module.

Signal Conditioning
Marki Microwave 信号调节 The MFBC-00009M 46.50 63.50 GHz passive MMIC bandpass filters are an ideal solution for mmWave, high rejection filtering. The MFBC-00009M is available as a connectorized module.

Signal Conditioning
Marki Microwave 信号调节 The MQS-0209 is a MMIC 2GHz - 9GHz 90 splitter/combiner. Wire bondable 50 ohm terminations are available on-chip. Passive GaAs MMIC technology allows production of smaller constructions that replace larger form factor circuit board constructions.

Signal Conditioning
Marki Microwave 信号调节 The MFHP-00005PSM family of passive MMIC surface mount highpass filters are an ideal solution for small form factor, high rejection filtering. The MFHP-00005PSM is available as a 4x4mm plastic QFN.

Signal Conditioning
Marki Microwave 信号调节 The MFBC-00020M family of passive MMIC bandpass filters are an ideal solution for mmWave, high rejection filtering. Marki employs unique packaging techniques to provide optimal performance in a convenient connectorized module.

Signal Conditioning
Marki Microwave 信号调节 The MFQH-00001PSM passive MMIC reflectionless bandpass filter is an ideal solution for small form factor, high rejection filtering. The MFQH-00001PSM is available as a 5x5mm plastic QFN.

Signal Conditioning
Marki Microwave 信号调节 The MFBP-00002PSM family of passive MMIC surface mount bandpass filters are an ideal solution for small form factor, high rejection filtering. The MFBP-00002PSM is available as a 4x4mm plastic QFN.

Signal Conditioning
Marki Microwave 信号调节 The MFBC-00011PSM family of passive MMIC surface mount bandpass filters are an ideal solution for small form factor, high rejection filtering. The MFBC-00011PSM is available as a 5x5mm plastic QFN.

Signal Conditioning
Marki Microwave 信号调节 The MFBC-00001PSM family of passive MMIC surface mount bandpass filters are an ideal solution for small form factor, high rejection filtering. The MFBC-00001PSM is available as a 5x5mm plastic QFN.

Signal Conditioning
Marki Microwave 信号调节 The MFBC-00002PSM family of passive MMIC surface mount bandpass filters are an ideal solution for small form factor, high rejection filtering. The MFBC-MFBC-00002PSM is available as a 5x5mm plastic QFN.

Signal Conditioning
Marki Microwave 信号调节 The MFBC-00016PSM family of passive MMIC surface mount bandpass filters are an ideal solution for small form factor, high rejection filtering. The MFBC-00016PSM is available as a 5x5mm plastic QFN.

Signal Conditioning
Marki Microwave 信号调节 The MFBC-00004PSM family of passive MMIC surface mount bandpass filters are an ideal solution for small form factor, high rejection filtering. The MFBC-00004PSM is available as a 5x5mm plastic QFN.

Signal Conditioning