CA 配件

SparkFun 配件 This is our new Hobby Motor now with a 6mm 10 tooth gear to make your basic projects a little simpler to manage. It works well for basic things like making a fan or spinning something pretty fast without much resistance.The motor has a normal opera

SparkFun 配件 USB C is fantastic. But until we have converted all our hubs chargers and ports over to USB C this is the cable you're going to need. Supporting USB 3.1 speeds and charging up to 3A this 1 meter cable is perfect for high data rate transfers and ch

SparkFun 配件 Low-profile electrolytic decoupling capacitors 10uF/25V. These capacitors are great transient/surge suppressors and work well as charge pump caps for MAX232 circuits. High quality radial electrolytic capacitors.

SparkFun 配件 This is a simple subminiature size axial lead mounted rectifier diode. Often used for reverse voltage protection the 1N4001 is a staple for many power DC to DC step up and breadboard projects. The 1N4001 is rated for up to 1A/50V.

SparkFun 配件 The US1881 is an integrated Hall effect latched sensor. That's nice but what does it do? Holding a magnet near the sensor will cause the output pin to toggle. This makes for a robust presence sensor. A reed sensor also works nicely but can be limite

SparkFun 配件 Check out these big 10mm through-hole LEDs! The opaque epoxy package causes these LEDs to have a soft diffuse glow.Features:587-591nm Yellow1.8-2.2VDC Forward Voltage20mA Forward Current40 degree viewing angle100-150 MCD outputDocuments:[Datasheet](

SparkFun 配件 The SparkFun Qwiic Quad Relay is a unique power accessory board that has been designed for switching not one but four high powered devices from your Arduino or another low powered microcontroller using I2C. Taking a look at the board the Quad Relay

SparkFun 配件 This is a row of 40 break away headers spaced 0.1" apart with long pins on both sides. This header is especially useful when you need to connect a PCB to a solderless breadboard. Each header can be broken apart to your preference to fit custom PCBs o

SparkFun 配件 2.4GHz Duck Antenna 2.2dBi with Reverse Polarized - SMA RF connector. Perfect for prototyping with our RF ICs. 50 ohm impedance. 4" long. Not sure which RF connector you need on your antenna? Check out our RF Connector Guide

SparkFun 配件 900/1800 MHz Duck Antenna 2dBi with regular RP-SMA RF connector. Perfect for use with the XBee 900MHz units. 50 ohm impedance. 105mm long. Be sure to pick the antenna with the right connector. Almost all 2.4GHz and 915MHz antennas need to be RP-SMA.

SparkFun 配件 1/6th Watt +/- 5% tolerance PTH resistors. Commonly used in breadboards and perf boards these 330Ohm resistors make excellent LED current limiters and are great for general use. Need more than one? Checkout our bags of resistors.

SparkFun 配件 This is the BC337 an NPN silicon BJT (Bipolar Junction Transistor). This little transistor can help in your project by being used to help drive large loads or amplifying or switching applications. The BC337 is specifically rated at 50V and 800mA max