sensors SparkFun 配件

SparkFun 配件 This disc load cell (sometimes called a strain gauge) can translate up to a whopping 200kg of pressure (force) into an electrical signal. Each load cell is able to measure the electrical resistance that changes in response to and proportional of th

SparkFun 配件 Flex Sensor 4.5"

SparkFun 配件 If you need to add user input without using a button then a capacitive touch interface might be the answer. The AT42QT1010 SparkFun Capacitive Touch Breakout offers a single capacitive touch button with easy-to-use digital I/O pins.The AT42QT1010 is

SparkFun 配件 Mini Photocell

SparkFun 配件 This is a 10 pack of the MyoWare Reference 2.0 Cables. The MyoWare 2.0 Reference Cable is meant as an extension for the MyoWare 2.0 Muscle Sensor's reference pin. You will just need to insert the pin into its housing and place a biomedical sensor p

SparkFun 配件 This is a handy cable for connecting a six pin GHR-06V type locking connector to breadboard friendly male pins. The cable features a 1.25mm pitch GHR-06V 'locking' JST connector commonly found on some sensors radios and other small devices.

SparkFun 配件 The SparkFun OpenLog Artemis (OLA) is an open-source data logger designed for users who need to capture high-quality data without writing any code. Preprogrammed to automatically log serial data GPS coordinates and sensor readings to a CSV file th

SparkFun 配件 This is a 5-pin JST-ZHR cable that's terminated with breadboard breadboard compatible male pins. It's the same cable that comes with our SPS30 Particulate Matter Sensor and is a great spare if you need one or if you happen to need to connect to a dev

SparkFun 配件 This is a piezoresistive force sensor from Tekscan. The harder you press the lower the sensor's resistance. Pressing hard the resistance changes from infinite to 300k. The sensor itself is thin and flexible but the resistance does not change whil

SparkFun 配件 Amphenol FCI Clinchr Conn. (3 POS,F)

SparkFun 配件 This is a small ambient light sensor that acts as an NPN transistor. The more the sensor is exposed to light the stronger the base bias. Simple to use! Simple breakout board available below.Documents:Hookup GuideDatasheet

SparkFun 配件 Infrared proximity sensor made by Sharp. Part # GP2Y0A41SK0F has an analog output that varies from 3.1V at 4cm to 0.3V at 30cm with a supply voltage between 4.5 and 5.5VDC. The sensor has a Japanese Solderless Terminal (JST) Connector. We recommend p